Product features:
The Night Owl Bollard is comprised of two components; a universal 'Bounce-back' Base unit designed to self-right the sign after impact and the Night Owl sign and graphics (Conspicuity panels) designed to provide high visibility and durability in areas without street lighting.
The reflex material of the base combined with the rigid polyethylene of the sign ensures that the bollard will withstand multiple impacts and return to upright without damage to the reflective surfaces, the sign or the base; thereby saving on expensive replacement costs. The reflectors are also recessed to further reduce potential damage with vehicle impacts.
-
Unique ‘dome’ shaped Base gives reliable bounce back performance irrespective of the type of impact (side scrape, side swipe or front on).
-
Base made from tough ‘Reflex’ material capable of withstanding impacts up to 70km/h to return the sign to an upright position ensuring the hazard remains clearly marked.
-
Moulded-in screw thread on the top of the Base means that no mechanical components are used on the sign.
-
Strong rigid construction of the sign withstands damage from the ‘trampling’ action of wheels running over the top of the sign.
-
The Sign section can be moulded in most colours including stone effect/mottle finishes for environmentally sensitive areas. See 'Colour Options' pop-up for the complete range.
-
The Night Owl Sign can be easily removed and replaced in under a minute reducing danger to Highway Contractors and inconvenience to road users.
-
No power supply is required, therefore road closure can usually be avoided during installation.
-
Diamond grade, fluorescent, retroreflective material (DG3) used as standard for high visibility. Diamond Grade DG³ reflective sheeting meets or exceeds the minimum recommended luminance index in more driving situations than any other sheeting available today. (ref 3M)
-
Retroreflective panel on the Sign edge provides best in class visibility: 0.045m2 (BS 8442 requires a min of 0.02m2)
-
Recyclable material used throughout; suitable for environmental re-use.
-
Adapter plate available to allow the Base to be fixed to many existing mountings. See 'Fixing Options' pop-up below for all fixings.
-
Single or Double sided options
Passed - Night Owl conforms to BS 8442:2006 (14) for Retro Reflective Self Righting Bollards
Passed - Night Owl conforms to BS 12767 Passive Safety of Non Harmful Structures (70,NE,4)
Passed - Night Owl conforms to BS EN 12899-2:2006 5.6.4 Torsion Test
SPECIFICATION
Sign Colour - choose from a wide range; See 'Colour Options' pop-up below.
Base colour - Black as standard.
Overall height: 1037mm
Max. bollard width: 395mm
Max. bollard depth: 110mm
Bounce-Back Base dimensions: 320 x 320m
Fixing centres: 228 x 228mm
Signface Diameter: 300mm
Front/rear reflector visible area: 0.16m2 (BS 8442 requires 0.15m2 min)
Side refelector area: 0.045m2 (BS 8442 requires a minimum of 0.02)
Weight: Sign 4.4kg (including base is 6.5kg)
Lower edge of Conspicuity Panel is 191mm above ground level (BS 8442 requires 100mm > 200mm)
RETROREFLECTIVE & GRAPHIC OPTIONS
Single sided (standard version): 1 x DG³ retroreflective front panel, DG³ retroreflective wraparound side panels, 300mm signface to front.
Double sided, Single sign (for increased visibility): 1 x DG³ retroreflective front panel, 1 x DG³ retroreflective back panel, DG³ retroreflective wraparound side panels, 300mm signface to front.
Double sided, Dual sign: 1 x DG³ retroreflective front panel, 1 x DG³ retroreflective back panel, DG³ retroreflective wraparound side panels, 300mm signface to front and back.
SIGN OPTIONS
Night Owl can be fitted with single or double-sided signs. Legal sign options for Highway use include; ref. 610 keep left, ref. 610 keep right, ref. 611 dual arrows, Blank White.
Other sign suggestions for non highway use are available.
Materials:
UV stabilised Medium Density Polyethylene (MDPE)
Fixing options:
